Guide To Clean Dyson Cordless Vacuum Filters

Is your Dyson cordless vacuum losing its suction power and not functioning properly? Your filters may become clogged with dust and debris decreasing their effectiveness and efficiency.

Cleaning the filters on your Dyson cordless vacuum is an easy task that can significantly improve the performance of your vacuum. Maintaining filters can help your vacuum work more effectively and last longer, ultimately saving you money.

This article will walk you through cleaning the filters to ensure your vacuum is operating at its peak efficiency. So, keep reading to learn how to clean your Dyson cordless vacuum filters like an expert.

Cleaning Process for Each Dyson Cordless Vacuum Model

Dyson DC59 and V6

Steps to follow:

1. Unplug and turn off your device.
2. Empty the garbage by removing the wand and any attachments.
3. Take out the filter by removing the filter cover and clean any debris or hair lodged in the brush bar by cleaning with a brush.
4. Rinse the trash can and filter it with water.
5. Use a soft brush to get rid of any tenacious dust or grime. Before putting them back together, give them at least 24 hours to dry.
6. Wipe the attachments with a moist cloth.
7. Reassemble the vacuum in reverse order when the dustbin, filter, and attachments have dried. Replace the filter cover, reinstall the brush bar, and place the filter in its original position.
8. Before using the vacuum again, check the battery to ensure it is fully charged.
9. Switch on the vacuum and make sure it is operating properly.

Dyson V7

Steps to follow:

1. Turn off and unplug the vacuum.
2. By pushing the red button on the unit’s top and pulling it out, remove the dirt bin.
3. Put the dirt bin’s contents in a trash can for disposal.
4. Cleanse the interior of the trash can and the cyclone assembly with a dry, clean cloth.
5. Remove the filter from the vacuum and gently tap it to remove any loose dirt and debris to clean it.
6. Rinse the filter with cold water and leave it for 24 hours to dry it completely.
7. Use a soft-bristled brush to clean the motorized brush bar and eliminate any tangled hair or debris.
8. Put the filter, cyclone assembly, and dirt bin back in their respective locations to reassemble the vacuum cleaner.
9. Test it out to make sure the vacuum cleaner is operating properly.

Dyson V8

Steps to follow:

1. Unplug the vacuum from the charger and turn it off.
2. Pull the red release tab to empty the dustbin, then toss the rubbish in a trash can.
3. Rinse the filter thoroughly under running water without using any soap or detergent.
4. Let the filter completely dry for at least 24 hours.
5. Wipe the motorized brush head with a moist cloth after using a soft brush to remove any dirt or debris.
6. Wipe down the combination and crevice tool with a moist towel, carefully removing any hair or debris that may have become lodged on it.
7. If required, wipe the vacuum’s exterior with a soft, damp cloth.
8. Keep the vacuum and accessories in a cold, dry location until the next use.

Dyson Cyclone V10

Steps to follow:

1. Unplug and shut off the vacuum.
2. Press the release button, hold the dustbin, and empty it.
3. Push the release button and carefully draw it out to remove the filter.
4. Tap the filter against the garbage container to eliminate any dust or particles.
5. Rinse the filter under cold running water until it is clean. 
6. Let the filtered air dry for 24 hours before putting it back in the vacuum.
7. Clean the vacuum’s exterior with a dry or wet cloth, including the cyclone and powered cleaner head.
8. Place the filter in the vacuum when it has dried.
9. Reattach any remaining accessories to the vacuum, then store them somewhere cold and dry.
10.  Avoid cleaning the vacuum with detergents, solvents, or other chemicals, as they could harm the surface and reduce its effectiveness.

Dyson V11

Steps to follow:

1. Unplug your Dyson V11 Torque Drive from the power source and switch it off before cleaning it.
2. Detach the dustbin from the vacuum and empty it into a garbage can. This will guarantee that the trash can has enough room for the subsequent cleaning session.
3. Find the filter on your Dyson V11 Torque Drive, then take it out.
4. Wash the filter in cold water and allow it to air dry for 24 hours before reinserting it.
5. Clean the brush bar for any debris. To untangle the hair, use scissors or a brush, and then wipe the brush bar with a moist towel.
6. Clean the crevice tool using a soft-bristled brush. You can also wash it with cold water.
7. Clean the vacuum and wipe the vacuum’s body along with any additional attachments with a soft, moist cloth.
8. Reassemble the vacuum after cleaning it thoroughly, ensuring each component is in its proper location.

Dyson V15

Steps to follow:

1. Turn off and unplug the vacuum before starting the cleaning process.
2. Empty the dustbin into a garbage can.
3. Clean the dustbin thoroughly using a soft brush or cloth. Make sure not to harm the filter.
4. Take out the filter and wash it in cold water but do not use detergent or soap.
5. Remove any extra water from the filter and let it air dry for at least a day.
6. Clear any tangled hair or debris from the brush bar.
7. Plug in the vacuum cleaner after reassembling it.

Why They should be cleaned

Improved Suction

Vacuum’s filters capture dust, grime, and other particles as they go through the device. The airflow that travels through the vacuum can be reduced if these filters accumulate junk over time.

Due to decreased air flow, less suction strength might make it more difficult for the vacuum to remove dirt and other particles from floors and carpets. You can boost suction and make it simpler to clean your home by cleaning the filters regularly.

Longer lifespan

Regular cleaning of Dyson cordless vacuum filters increases their longevity and lifespan. Clogged filters can decrease the vacuum’s suction power, forcing the motor to work harder and risking overheating and damage.

Routine cleaning of filters results in less chance of the vacuum overheating. The vacuum runs effectively and efficiently for a longer time if the filters are cleaned.

Improved Air Quality

Cleaning the filters in vacuum prevents dust and allergens from being recirculated into the air. As a result, your home’s overall air quality can become better because the vacuum starts releasing cleaner and fresher air.

By lowering the number of allergens and other particles in your home, you may improve the air quality and make breathing easier.

How to get most out of Dyson Cordless Vacuum Filters

To get the most out of your Dyson cordless vacuum filters, follow these steps:

1. Regularly clean your filters: Cleaning your Dyson cordless vacuum filters frequently is the first step in maximizing their effectiveness. To fully clean the filters, remove them as directed by the manufacturer. Doing so allows you to maintain suction force and ensure your vacuum operates as effectively as possible.

2. Replace filters as needed: Your filters will eventually wear out and require replacement. Keep an eye on your filters’ condition and swap them out as needed. This will keep your vacuum operating efficiently and at its best suction power.

3. Store your vacuum properly: Ensure you store your Dyson cordless vacuum appropriately when not in use. This will aid in avoiding dust and dirt on the filters and other parts. To correctly store your vacuum, according to the manufacturer’s instructions.

4. Use the correct attachments: You probably received a choice of accessories with your Dyson cordless vacuum. Ensure you’re using the appropriate attachment for the task to get the most out of your vacuum. This will lessen the likelihood of other dust and debris clogging your filters.

FAQ’s

How frequently should I clean my Dyson cordless vacuum filters?

The amount of dirt your Dyson cordless vacuum picks up and how frequently you use it will influence how frequently you need to clean the filters. Generally speaking, you should clean the filters at least once a month. If you have pets or use your vacuum frequently, you should clean the filters more frequently.

Can I wash my Dyson cordless vacuum filters in the dishwasher?

The filters should be kept from the dishwasher since the heat could weaken and damage the filters. Cleaning the filters under flowing cold water is optimal.

How can I know whether my Dyson cordless vacuum filters need to be changed?

Damaged and clogged filters can diminish the vacuum’s suction power. So, changing the filters every six months is suggested to keep them operating at their peak efficiency.